Thickness:2-100mm
WT:SCH10-XXS
Material:ASTM A179 ,etc
Qulification:ISO9001,API,CE
The description of ASTM A179 PIPE
| Type | Application | Standard | Material |
| alloy steel pipe | it is used in petroleum,chemical, electric power,boiler etc as they Resistance to high temperature, low temperature resistance,Corrosion resistance |
ASTM SA335 | A335P22 A335P5 A335P9 A335P91 |
| stainless steel pipe |
Applies to oil, aviation, metallurgy, food, water conservancy,electric power, chemical industry, Chemical, chemical fiber, pharmaceutical machinery, etc |
ASTM A213 ASTM A312 |
304 304L 316 316L 321 |
| steel pipe for low temperature |
Apply to-45 °C ~ 195 °C level-low temperature and low pressure vessel pipe heat exchanger pipeline |
ASTM A333 | A333 GR6 |
| steel pipe for high-pressure boiler |
Used in manufacturing by high pressure boiler tube,the collection box, steam pipe, etc |
ASTM SA106 | A106 GRB |
| steel pipe for fluid |
Applicable to transmission fluid which are seamless steel tube |
ASTM A106 ASTM A53 |
A53 B A106 B |
| steel pipe for structure |
Used in general structure, engineering scaffolds, mechanical |
ASTM A53 | A53 B |
| pipeline steel pipe | Used in oil and natural gas industry in order to transmit the he oxygen,water and oil |
API 5L | A,B,X42 ,X46,X52,X56 ,X60,X65,X70,X80 |
| ERW STEEL PIPE | Used in general structure stents, low voltage liquid transportation, etc |
GB/T13793-1992 GB3091-2001 |
A53 A333 GR6 |
| Sprial steel pipe | Apply to low voltage liquid transportation | SY/T5037-2000 | A53 A333 GR6 |
Description:
This specification covers tubes 1/8 to 3 in. [3.2 to 76.2 mm],
inclusive, in outside diameter. Note 1Tubing smaller in outside
diameter and having a thinner wall than indicated in this
specification is available. Mechanical property requirements
do not apply to tubing smaller than 1/8 in. [3.2 mm] in outside
diameter or with a wall thickness under 0.015 in. [0.4]
This specification covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Tubes shall be made by the seamless process and shall be cold drawn. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, and sulfur. The steel materials shall also undergo hardness test, flattening test, flaring test, flange test, and hydrostatic test.
